Sluggie the Defender

Welcome to the Pelly Land Rover Defender blog. This has been started with the aim of sharing our Defender story with others who may have the same interest as well as a wish to exchange experiences.

Pages

▼

Blog Articles

▼

External References

▼

Tuesday, 25 May 2021

More work on the under carriage

Meant to take an image of the sleeve on the transfer box. To quote from Ashcroft Transmission website: " The hole that supports the hea...

Friday, 21 May 2021

Transmission Rebuilding

Ordered some grease for the inner of the clutch release bearing. Workshop manual stated that it needs to have Molybdenum Sulphide. Clean up ...

Tuesday, 18 May 2021

Transfer Box Fitted

Used the crane to hoist up the transfer box. Mounted the main gearbox on a number of wooden beams to raise enough to allow the awkward align...

Bell Housing

Fitted the bell housing and release bearing support. Gearbox looking mint. Bell housing added. Release bearing support fitted.

Monday, 17 May 2021

Gearbox and Transfer box fitting

Got the main gearbox and transfer box back on the bench. Had to use the crane. There was no way I would be able to lift them directly off th...

Friday, 14 May 2021

Sedimentor Fitting

Fitting the mounting bracket and the sedimentor to the left hand side of the chassis just behind the wheel. Location of the holes to mount t...

Fuel Tank Mounting Bracket

Fitted a new mounting bracket for the fuel tank. Noticed that the tabs on the bracket need to be folded over the bolt heads and around the c...

View web version

Powered by Blogger.